How to Fix Samsung Washing Machine Error Code 4C

Photo of author

By Editor

Fix Samsung Washing Machine Error Code 4C

The 4C error code on your Samsung washing machine shows up when there’s a problem with the water supply. This usually happens if the water taps aren’t fully turned on, the hoses are bent, damaged, or blocked, or if the small mesh filters at the connection points are clogged with dirt. A dirty detergent tray or low water pressure can also trigger this error.

If you’re seeing this error, don’t worry—it’s often easy to fix. By checking a few key parts like the water taps, hoses, and filters, you can usually solve the issue without needing professional help. Cleaning the detergent tray and making sure the water pressure is adequate are also simple fixes that might resolve the problem. Read this guide to fix IE error in lg washing machine.

This guide provides step-by-step instructions to help you troubleshoot and fix the 4C error quickly. It covers common solutions and works for a wide range of Samsung washing machine models, ensuring your washer runs smoothly again.

This guide applies to all major Samsung washing machine models, including the following:

592-49045

592-49075

592-49082

592-49087

WF203ANSXAX

WF206ANSXAA

WF206ANSXAC

WF206BNWXAC

WF210ANWXAA

WF218ANBXAA

WF218ANWXAA

WF219ANBXAA

WF219ANWXAA

WF220ANWXAA

WF328AAGXAA

WF328AARXAA

WF328AAWXAA

WF330ANWXAA

WF340ANGXAC

WF340ANRXAC

WF350ANWXAA

1. Check the Water Taps

The first step in fixing the 4C error is to check that both the hot and cold water taps are fully open. If either of these taps is not completely turned on, the washing machine won’t receive enough water, which can trigger the 4C error code. Make sure both taps are turned all the way to the open position.

If your washing machine only uses cold water, you need to install a “Y-connector.” This connector splits the cold water supply so it can flow into both the cold and hot water inlets of the machine. Even if you’re not using hot water, the washer still requires the cold water input for proper operation. 

Without the Y-connector, the washing machine may not detect enough water coming through, causing the error. Always ensure the taps are open properly, and if you’re using only cold water, make sure the Y-connector is correctly installed.

2. Inspect the Water Hoses

Next, check the water hoses connected to your washing machine. Look for any kinks, bends, or blockages in the hoses that might prevent water from flowing freely. If a hose is twisted or bent, it can block the water flow and trigger the 4C error code. Gently straighten any kinks or bends you find.

Also, make sure the hoses are tightly connected at both ends – to the washing machine and the water taps. Loose connections can cause leaks or reduce water pressure, which may lead to the error. If the hoses are loose, tighten them carefully to ensure a secure fit.

Lastly, inspect the hoses for any signs of leaks. Even small leaks can cause a loss of water pressure and may result in the 4C error. If you find any blockages inside the hoses, disconnect them and rinse them out to remove debris. This will help ensure water flows properly and the error is fixed.

3. Check the Mesh Filters

The next step is to check the mesh filters located where the water hoses connect to your washing machine. These filters can collect dirt, debris, or mineral buildup, which can block the water flow and cause the 4C error.

To clean the filters, carefully remove them from the connection points. Use a soft brush or running water to remove any debris or buildup on the filters. Make sure they are completely clean before putting them back.

Once the filters are cleaned, reinstall them securely, making sure they fit properly in their slots. A loose or poorly installed filter can cause water flow problems, so ensure the filters are tightly in place. This simple step can help prevent the 4C error and keep your washing machine working smoothly.

4. Clean the Detergent Tray

Cleaning the detergent tray is an important step to fix the 4C error. Detergent residue, fabric softener, and soap buildup can clog the tray, which prevents water from entering the washing machine correctly. To clean it, remove the detergent tray from the machine and rinse it under warm water. Use a soft brush or cloth to scrub away any buildup or mold that may have formed.

Additionally, it’s crucial to use the right type of detergent. Always use high-efficiency (HE) detergent, as it is designed for modern washers and produces fewer suds. If you use regular detergent, it may create too many suds, which can confuse the washing machine’s sensors and prevent it from detecting the proper water level. 

This can trigger the 4C error. By cleaning the detergent tray regularly and using the correct detergent, you help ensure that your washing machine can function properly without any water flow issues.

5. Check the Water Pressure

The water pressure in your home should be at least 10 psi (pounds per square inch) for your washing machine to work properly. Low water pressure can cause the machine to not fill with enough water, which may trigger the 4C error.

To check the water pressure, you can use a water pressure gauge. Attach the gauge to the faucet where your washing machine is connected and check the reading. If the pressure is below 10 psi, this could be the cause of the issue.

If you don’t have a gauge, you can also contact your water utility provider to ask about the water pressure in your area. If the pressure is too low, you may need to consider contacting a plumber or your utility company to resolve the issue. Ensuring proper water pressure will help your washing machine run smoothly without triggering the 4C error.

6. Reset the Washer

After checking everything else, the next step is to reset your washing machine. Sometimes, resetting the machine can clear the error code. To reset it, first unplug the washing machine from the power outlet. Leave it unplugged for about 1-2 minutes to allow the machine’s system to fully reset.

Once the time has passed, plug the washer back in and turn it on. Check to see if the 4C error code has disappeared. If the error is gone, the issue is likely resolved. However, if the error continues, there may be a deeper problem that requires a professional technician to inspect your washing machine. Resetting the washer is a simple step that can often fix minor glitches and restore normal operation.

Causes of the Samsung Washer 4C/4E Error Code

The 4C or 4E error code on your Samsung washing machine usually means there is an issue with the water supply. Here are six common causes of the error and how to address them:

Closed or Faulty Water Taps
If either the hot or cold water taps are not fully open, the washing machine may not receive enough water, causing the 4C error. Ensure that both taps are completely open to allow proper water flow. If you’re using only cold water, a “Y-connector” might be needed to ensure water flows through both hoses.

Clogged or Blocked Water Hoses
Water hoses that are kinked, bent, or clogged can prevent water from flowing freely into the washing machine. Check both the inlet hoses for any visible damage or blockages. If the hoses are blocked, disconnect them and flush them out with water.

Dirty or Clogged Mesh Filters
The mesh filters at the connection points of the water hoses may accumulate debris, minerals, or limescale over time, preventing water from entering the machine properly. Inspect the filters and clean them thoroughly to allow free water flow.

Dirty Detergent Tray
Soap, detergent, or fabric softener residue can build up in the detergent tray, blocking the water from entering the washing machine. Remove the detergent tray and clean it with warm water and a brush to clear any debris. This will ensure proper water intake during the wash cycle.

Low Water Pressure
For your washing machine to function properly, the water pressure must be at least 10 psi. If the pressure is too low, the washer may not be able to fill with enough water, triggering the 4C error. You can measure the water pressure with a gauge or contact your water provider to ensure it’s adequate. If the pressure is too low, consider contacting a plumber.

Defective Water Inlet Valve
The water inlet valve controls the flow of water into the washing machine. If this valve becomes faulty or defective, it may not allow water to enter the washer, causing the 4C/4E error code. If none of the above steps resolve the issue, the inlet valve may need to be replaced by a technician.

By addressing these six potential causes, you can fix the 4C/4E error and restore your washing machine’s proper function. Regular maintenance, like cleaning the filters and checking the hoses, can also help prevent future issues.

Conclusion

Most 4C errors in Samsung washing machines can be easily fixed by following the steps mentioned in this guide. By checking the water taps, hoses, mesh filters, detergent tray, and water pressure, you can solve the problem and get your washing machine working again.

To avoid similar issues in the future, it’s important to perform regular maintenance on your washing machine. Clean the detergent tray, check the hoses for damage, and ensure the water pressure is sufficient. Regular care will help keep your machine running smoothly and prevent future error codes from appearing.

Leave a Comment